Hard Drive Assembly-3.5-Inch And 2.5-Inch; Removing 3.5-Inch Hard Drive Assembly - Dell OptiPlex 5060 Tower Service Manual

2. Install the:
a. Front bezel
b. Side cover
3. Follow the procedure in
Hard drive assembly—3.5-inch and 2.5-inch
Removing 3.5–inch hard drive assembly
1. Follow the procedure in
2. Remove the:
a. Side cover
b. Front bezel
3. To remove the hard drive assembly:
a. Disconnect the SATA cable and the power cable from the connectors on the hard drive.
22 Removing and installing components
After working inside your
Before working inside your
computer.
computer.