Using Button Combinations - Vizio V Series User Manual

There are other functions that are triggered by
different button combinations on the sound bar.
Function
Factory
All LEDs will flash 3 times
Reset
VIZIO TV Remote
Control
Eco Power Mode
Speaker Test
LED Behavior
Reset the sound bar to the factory default settings. To perform a Factory Reset,
Press and hold the Bluetooth (
Note: This will erase all settings and preferences that you have set.
Enabled
Enable/disable the use of a VIZIO TV remote control to power on and adjust the volume of the
sound bar. To enable/disable this function, Press and hold the Power (
Disabled
buttons for 5 seconds.
When the Eco Power Mode setting is enabled, the sound bar will automatically
Enabled
power down after a period of inactivity. When disabled, the sound bar will remain
powered on until you turn it off. To enable/disable this function, Press and hold the
Power (
Disabled
Note: Eco Power mode is disabled by default.
Press and Hold the Bluetooth( ) and Volume Up (+) buttons for 5 seconds.
A voice will begin calling out each speaker beginning with left (left, right, and
—
subwoofer-white noise). If any of these are missing, check the connection and run
the speaker test function again.

Using Button Combinations

Buttons are located here.
Description
) and Volume Down (—) buttons for 5 seconds.
) and Volume Down (—) buttons for 5 seconds.
) and Volume Up ( + )
ENG - 11