Frigidaire FER311F Operating Instructions

Before Operating Your Dryer

Read your dryer Owner's Guide. It has
important safety and warranty information. It
also has many suggestions for best drying results.
To reduce the risk of fire, electric
shock, or injury to persons, read the IMPORTANT
SAFETY INSTRUCTIONS in your dryer owner's
guide before operating this appliance.

Operating Steps

Read Drying Procedures in your Owner's
Guide. It explains these operating steps in
detail.
1. Prepare items for drying.
Printed in U.S.A.
OPERA OPERA OPERATING INSTRUCTIONS TING INSTRUCTIONS TING INSTRUCTIONS TING INSTRUCTIONS
OPERA OPERA TING INSTRUCTIONS
2. Check that lint screen is clean and in
place.
3. Load the dryer. If desired, add a dryer
fabric softener sheet.
4. Close the dryer door.
5. Turn cycle selector clockwise to
desired setting.
6. Start dryer. Push the Push to Start button
for 2 seconds, or turn the Turn to Start
control clockwise to ON. Hold for 1-2
seconds and release.
7. At end of cycle, remove items immedi-
ately and hang or fold.
8. Clean lint screen after every load.
10

Cycle Selection

Always follow directions on fabric care labels.
heat to dry items containing feathers or down,
foam rubber, plastics, or similarly textured,
rubber-like materials. Use Cool Down (no heat)
setting only.
Turn cycle selector clockwise to desired cycle
and setting. Each cycle ends with a cool down
period. The heat automatically turns off and the
load continues to tumble for 5-10 minutes. This
reduces wrinkling and makes items easier to
handle during unloading.
Drying time varies depending on size and
dampness of load, weight and fabric type. Room
temperature and humidity, type of installation
and electrical voltage or gas pressure can also
affect drying time.
To avoid fire hazard, do not use
P/N 134516800 (0412)