Agency Certifications - Emerson PACSystems RX3i Manual

Battery & Energy Pack Manual
GFK-2741J
Status Information
The Energy Pack provides the following status information to the Controller, which it uses
to generate fault and status bit indications. For Controller fault and status bit details, refer
to the Controller user manual.
Charging
Fault
Low capacitance
Charged
Energy Pack LEDs
Details on the LED operation for this Energy Pack are listed in LED Indications.
3.2.12

Agency Certifications

The following table lists the standards to which the Energy Pack has been certified.
Description
N.A. Safety for
Information
Technology Equipment
N.A. Safety for
Industrial Control
Equipment
Electromagnetic
Compatibility Directive
European EMC
Note:
Energy Packs
The Energy Pack is charging; not yet fully charged.
A hardware fault exists in the Energy Pack.
The Energy Pack is near its end of life and should be replaced.
The Energy Pack is fully charged and is ready to support CPU operation.
Agency Standard or
Marking
The agency approvals listed above and on the Declaration of Conformities are believed to
be accurate; however, a product's agency approvals should be verified by the marking on
the unit itself.
Comments
Certification by Underwriter's Laboratories
to UL 60950-1and CSA 60950-1
Certification by Underwriter's Laboratories
to UL 508 and CSA C22.2 No 142 - M1987
Self-Declaration in accordance with
European Directives; Refer to Technical
Support at
https://www.emerson.com/Industrial-
Automation-Controls/support
Declaration of Conformity
Chapter 3
Oct 2019
for EC
29