Installing the Device
2.5.1 Connecting High AC/DC Power
•
2.5.1
Connecting High AC/DC Power
To connect a high AC/DC power supply to the device, do the following:
Electrocution hazard – risk of death, serious personal injury and/or damage to
the device
Make sure the supplied cover is always installed over high voltage screw terminal
blocks.
Electrical hazard – risk of damage to equipment
Do not connect AC power cables to a 12, 24 or 48 VDC power supply terminal block.
Damage to the power supply may occur.
10
Equipment must be installed according to applicable local wiring codes and
standards.
DANGER
NOTICE
RUGGEDCOM RX1511
Installation Manual, 01/2021, C79000-G8976-1056-19