Cleaning Your Pp8S - CAMBRIONIX PP8S User Manual

5.6.Cleaning your PP8S

Cleaning the product is generally not required, although in some instances it may be necessary
if excess dirt/ dust/ hair has accumulated, or if minor liquid spillages have occurred on the
module during operation or storage.
Ensure that the product is switched off and the power cord is removed from the product.
l
Hold the power cable by the plug and do not touch either the plug or the power cord
with wet or damp hands as an electrical shock may result
Wipe the product with a clean, dry and soft cloth. Do not use detergents which contain
l
alcohol, solvent or surface-active agents. Do not spray water or detergent directly onto
the product
Wet a soft and dry cloth in water and wring thoroughly to clean the product as required
l
Dry the product thoroughly once the cleaning has finished
l
Reconnect the power cord and use your product as advised once cleaning and drying is
l
complete
PP8S
Electric shock or personal injury may occur
If there is a dirt/ spillage over a ventilation slot, external data/ power
l
connector or product aperture, please remove power from the unit without
touching the liquid and contact Cambrionix immediately
Page 14 of 18