Power Limitation - IKEA VALBILDAD Manual

ENGLISH

Power limitation

When first connecting to the domestic power supply, the installer must set the power of the hob
cooking areas based on the actual abilities and capacity of the power supply itself.
If this is not necessary, the hob can be turned on directly using
operations below to access the menu.
- Connect the hob to the domestic mains power.
- All the digits light up for a few seconds.
- As soon as the digits go out, press the hob selection buttons
seconds until the current setting appears in the timer digits.
- Use " + " and " - " to select a suitable power absorption, following the table provided below.
- Press the hob selection buttons again and hold them for 5 seconds to confirm selection.
Table of value..:
Configuration Kw
0 3.7 Kw
1 3.5 Kw
2 3 Kw
3 2.5 Kw
4 2 Kw
5 1.5 Kw
, otherwise, follow the
Notes
Standard initial setting
12
and hold for 5