Page 2
Foreword The installation, use and maintenance manual (hereinafter Manual) provides the user with information necessary for correct and safe use of the machine (or “appliance“). The following must not be considered a long and exacting list of warnings, but rather a set of instructions suitable for improving machine performance in every respect and, above all, preventing injury to persons and animals and damage to property due to im- proper operating procedures.
Contents A SAFETY INFORMATION ......................... 5 General information ........................5 Personal protection equipment ......................6 General safety ..........................6 General safety rules ........................7 Safety signs to be placed near the machine area ................. 8 Transport, handling and storage ...................... 9 Installation and assembly .......................
Page 4
G MACHINE CLEANING AND MAINTENANCE..................... 20 Ordinary maintenance ......................... 20 G.1.1 informations for maintenance....................20 G.1.2 Cleaning the appliance and accessories ................20 G.1.3 External parts........................20 G.1.4 Other surfaces........................21 G.1.5 Periods of non-use ......................21 Brief Troubleshooting guide ......................21 Repair and extraordinary maintenance ....................
SAFETY INFORMATION General information To ensure safe use of the machine and a proper understanding of the manual it is necessary to be familiar with the terms and typographical conventions used in the documentation. The following symbols are used in the manual to indicate and identify the various types of hazards: WARNING Danger for the health and safety of operators.
Personal protection equipment Summary table of the Personal Protection Equipment (PPE) to be used during the various stages of the machine's service life. Protective Stage Safety Gloves Glasses Safety garments footwear helmet — ● ○ — ○ Transport ● ○ —...
• Place emergency telephone numbers in a visible position. • The A-weighted emission sound pressure level does not exceed 70 dB(A). • Turn the appliance off in case of fault or poor operation. • Do not use products (even if diluted) containing chlorine (sodium hypochlorite, hydrochloric or muriatic acid, etc.) to clean the appliance or the floor under it.
indicating the personal protection equipment to be used by them. In order to reduce the risks, provide for sufficient spaces while installing the unit. To preserve these conditions, the areas around the machine must always be: – kept free of obstacles (e.g. ladders, tools, containers, boxes, etc.); –...
Prohibition Meaning Keep the area around the appliance clear and free from combustible materials. Do not keep flammable materials in the vicinity of the appliance Install the appliance in a well-ventilated place to avoid the creation of dangerous mixtures of unburnt gases in the same room Danger Meaning...
Electrical connection Before connecting, make sure the mains voltage and frequency match those indicated on the appliance data plate. • Work on the electrical systems must only be carried out by specialised personnel. • Connection to the power supply must be carried out in compliance with the regulations and provisions in force in the country of use;...
– for appliances with stainless steel cabinet, remove the protective film very slowly without tearing it, to avoid leaving glue stuck to the surface; – should this happen, remove the traces of glue with a non-corrosive solvent, rinsing it off and drying thoroughly; –...
Precaution in case of long periods • Machine maintenance, checking and overhaul operations must only be carried out by specialised personnel or the Customer Care Service, provided with adequate personal protection equipment (safety shoes and gloves), tools and ancillary means. •...
EN 203–1 EU standard logo IMQ/GS gas category gas pressure Pmbar Electrolux Professional SpA Viale Treviso 15 33170 Porde- manufacturer none Italy Dataplate position IMPORTANT This instruction manual contains information relevant to various appliances. See the dataplate located under the control panel to identify the appliance (see picture below).
Children shall not play with the appliance. Cleaning and user Manufacturer Electrolux Professional SpA or any other maintenance shall not be made by children without supervision. service centre authorised by Electrolux Professional SpA.
Guard an element of a machine used in a specific • operations carried out by non-specialised personnel; way to provide protection by means of a • unauthorized modifications or operations; physical barrier. • missing, lack or inadequate maintenance; Safety device a device (other than a guard) that elimi- •...
Gas, electricity, water and other They can be safely kept, recycled or burned in an appropriate waste incineration plant. Recyclable plastic parts are marked connections (if present, depending on the as follows: appliance and/or model) • Any installation work or maintenance to the supply system (gas, electricity, water and/or steam, if present) must only Polyethylene be carried out by the utility company or an authorised...
Countertop models (Only for N9E range) 2. correct adjustment of primary air supply to burner/s 3. pilot nozzle/s replacement 1. See the installation diagram for the position of the gas connection on the bottom of the appliance. 4. minimum flame screw/s replacement 2.
E.10 Electrical connections 2. Replace nozzle “G“ with one suitable for the type of gas (see table “B“, Appendix); E.10.1 Electric appliances The nozzle identification number is indicated on nozzle body; WARNING 3. Retighten screw coupling “H“. Before connecting, make sure E.7.5 Minimum flame screw the mains voltage and frequency...
IMPORTANT E.10.4 Circuit breaker “Positive trip“ effect of the safety thermostat (used Verify that a safety circuit breaker is installed between the on some equipment type as per norms prescrip- power cable of the appliance and the mains electric line. tions) interrupts the unit operability (heating) even The contact opening max.
F.2.2 Switching off F.4.1 Switching on To turn off the main burner • Turn on the main switch located ahead of the appliance. • Turn thermostat knob “A“” to the required temperature. • Turn knob “A“ to position to turn off the main burner; Lighting up of green indicator “C“...
Rubbing in a circular motion combined with the particles of • Go over all stainless steel surfaces vigorously with a cloth dirt on the cloth/sponge could spoil the steel’s satin finish. moistened with paraffin oil in order to create a protective film;...
Pilot burner, Abnormal operation 1. Remove the knobs and control thermocouple, panel; Any of the following are considered to be abnormal igniter assem- 2. Remove the cast-iron oven plate operation and may require servicing: bly Oven and the pilot assembly protection; •...