Step
Screw (quantity)
4
M2 × 2 mm, flat-head, nylon-coated (4)
When installing:
Ensure that the connectors are attached firmly.
1190 Hall sensor board with cable
For access, remove these FRUs in order:
• "1010 Removing the nano-SIM card and the nano-SIM-card tray" on page 64
• "1020 Base cover assembly" on page 64
• "1080 Built-in battery" on page 72
• "1160 Coin-cell battery" on page 80
Removal steps of the hall sensor board with cable
Color
Torque
Silver
0.181 Nm
(1.85 kgf-cm)
.
Chapter 8
Removing or replacing a FRU
83