Epson PowerLite EB-750F User Manual page 158

5. Select the edge you want to blend on each projector and press Enter.
You see a screen like this:
6. Select the Blending setting and select On.
7. Press Esc to return to the previous screen.
8. Select the Blend Start Position setting and adjust the point where edge blending begins.
Note: If you created a unified image area using the Edge Blending feature, set the Blend Start
Position setting to 0.
9. Select the Blend Range setting and use the arrow buttons to select the width of the blended area so
that the displayed guides are at the edges of the overlapping area between the two images.
Note: If you created a unified image area using the Edge Blending feature, set the Blend Range
setting to 300.
10. Select the Blend Curve setting and select a gradient for the shaded area on the projectors.
11. Press Esc to go back to the previous screen.
158