TCS TASTA Series Instruction Manual page 15

Control function for additional functions*
If the control function has been configured, you can trigger these by pressing the function button (delivery
state).
Internal call*
You can call another indoor station. Shortly press the function button and/or the light switch button. An ack-
nowledgememt tone sounds, if the call has reached its call destination. If the call is accepted
at the called device, a voice connection is established. One internal call can be configured to the function button
and one internal can be configured to the light switch button.
Parallel call*
In case of an incoming door, floor or internal call a second indoor station sounds parallel. The ring tone sounds
at both indoor stations.
Call diversion*
An incoming call is diverted to a second indoor station. Shortly press the function button. The red LED blinks.
The call diversion is activated. Shortly press the function button again. The red LED expires. The call diversion
is deactivated.
Floor door release function*
If the floor push-button at the floor door is pressed, you can open the floor door (instead of the front door) with
the door release button within the next 30 seconds.
Automatic door release*
If this function is activated, an incoming door call directly triggers the door release. Shortly press the function
button. The red LED blinks. The door release automatic is activated. Shortly press the function button again.
The red LED expires. The door release automatic is deactivated.
* These settings are made by your electrician.
DISPOSAL
Dispose the device separately from
household waste via an electronic
waste collection point. You can
contact your local administration
to contact the competent collection
centre. The packaging is recycla-
ble. Dispose the packaging parts
separately in containers for card-
board and paper or plastic.
If you have any questions, please
contact the TCS HOTLINE.
Phone +49 4194 9881-188 | e-mail
hotline@tcsag.de
EN
SERVICE
15