Table of Contents
Advertisement
• When you use an ESD wrist strap, follow all electrical safety procedures. An ESD wrist strap is
used for static control. It does not increase or decrease your risk of receiving electric shock
when using or working on electrical equipment.
• If you do not have an ESD wrist strap, just prior to removing the product from ESD packaging
and installing or replacing hardware, touch an unpainted metal surface of the system for a
minimum of 5 seconds.
Figure 51. Location of the ESD plugs
8. Release the service access cover latch by pushing the release latch (A) in the direction shown.
9. Slide the cover (B) off the system unit. When the front of the service access cover clears the upper
frame ledge, lift the cover up and off the system unit.
Attention: Operating the system without the service access cover on for more than 10 minutes
when the system power is turned on might damage the system components.
56 Power Systems: Power Systems: Control panel
Advertisement
Table of Contents
