Table of Contents
Advertisement
Figure 14. Placing the system into the operating position
5. Push the system unit (B) back into the rack until both release latches of the system unit lock into
position.
Secure the cable management arm with hook-and-loop fasteners around the back side of the cable
management arm, but not around the cables.
6. Gently push the cover (A) in until the cover snaps into place.
The cover has indentations where you can hold it more easily. Use the alignment pin (B) to secure the
cover to the system as shown in Figure 15 on page 17. Push along the grill area above the fans to
secure the cover to the front.
16 Power Systems: Power Systems: Control panel
Advertisement
Table of Contents
