Service And Maintenance; Routine Equipment Checks; Product Cleaning; Cleaning The Display Case - Raymarine AXIOM Series Installation Instructions Manual

5.1 Service and maintenance

This product contains no user serviceable components. Please refer all maintenance and repair to
authorized Raymarine dealers. Unauthorized repair may affect your warranty.
Warning: High voltage
This product contains high voltage. Adjustments require specialized service
procedures and tools only available to qualified service technicians. There are
no user serviceable parts or adjustments. The operator should never remove the
cover or attempt to service the product.
Warning: FCC Warning (Part 15.21)
Changes or modifications to this equipment not expressly approved in writing by
Raymarine Incorporated could violate compliance with FCC rules and void the
user's authority to operate the equipment.
Caution: Sun covers
• If your product is supplied with a sun cover, to protect against the damaging
effects of ultraviolet (UV) light, always fit the sun cover when the product is
not in use.
• To avoid potential loss, sun covers must be removed when travelling at high
speed, whether in water or when the vessel is being towed.

Routine equipment checks

It is recommended that you perform the following routine checks, on a regular basis, to ensure the
correct and reliable operation of your equipment:
• Examine all cables for signs of damage or wear and tear.
• Check that all cables are securely connected.

5.2 Product cleaning

Best cleaning practices.
When cleaning products:
• Lightly rinse or flush with clean, cool fresh water.
• If your product has a display screen, do NOT wipe the screen with a dry cloth, as this could
scratch the screen coating.
• Do NOT use: abrasive, acidic, ammonia, solvent or other chemical based cleaning products.
• Do NOT use a jet wash.

Cleaning the display case

The display unit is a sealed unit and does not require regular cleaning. If it is necessary to clean
the unit, follow this basic procedure:
1. Switch off the power to the display.
2. Wipe the display with a clean, soft cloth (a microfibre cloth is ideal).
3. If necessary, use a mild detergent to remove grease marks.
Note: Do NOT use solvents or detergents on the screen itself.

Cleaning the display screen

A coating is applied to the display screen. This makes it water repellent, and prevents glare. To avoid
damaging this coating, follow this procedure:
1. Switch off the power to the display.
50