Stihl HT 100 Instruction Manual page 19

Hide thumbs Also See for HT 100:
Table of Contents

Advertisement

Available languages

Available languages

Remove the cap.
N
Filling the chain oil tank
Fill up with chain oil
N
Take care not to spill chain oil while
refilling and do not overfill the tank.
STIHL recommends you use the STIHL
filler nozzle for chain oil (special
accessory).
Closing
Grip must be vertical:
Fit the cap – marks on tank cap and
N
oil tank must line up.
Press the cap down as far as stop.
N
HT 100, HT 101, HT 130, HT 131
While holding the cap depressed,
N
turn it clockwise until it engages in
position.
The marks on the cap and oil tank are
then in alignment.
Fold the grip down.
N
Tank cap is locked.
If the oil level in the tank does not go
down, the reason may be a problem in
the oil supply system: Check chain
lubrication, clean the oilways, contact
your dealer for assistance if necessary.
STIHL recommends that you have
servicing and repair work carried out
exclusively by an authorized STIHL
servicing dealer.
If the tank cap cannot be locked in the oil
tank opening
Bottom of cap is twisted in relation to
top.
Remove the cap from the oil tank
N
and check it from above.
English
17

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ht 101Ht 130Ht 131

Table of Contents