Table of Contents
Advertisement
Removing the power button with optional fingerprint
reader
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
3. Remove the
display
assembly.
About this task
The figure indicates the location of the power button with optional fingerprint reader and provides a visual representation of the removal
procedure.
Steps
1. Remove the screw (M1.6x2) that secures the power-button bracket to the palm-rest and keyboard assembly.
2. Lift the power-button bracket off the palm-rest and keyboard assembly.
3. Remove the screw (M1.6x2) that secures the power button to the palm-rest and keyboard assembly.
4. Disconnect the power-button cable (or the optional fingerprint-reader cable) from the connector on the palm-rest and keyboard
assembly.
5. Lift the power button, along with its cable, off the palm-rest and keyboard assembly.
Installing the power button with optional fingerprint
reader
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The figure indicates the location of the power button with optional fingerprint reader and provides a visual representation of the
installation procedure.
Before working inside your
computer.
Removing and installing components
45
Advertisement
Table of Contents
