Bottom Cover; Removing The Bottom Cover - Dell OptiPlex 7480 All-In-One Service Manual

6. Replace the two screws (M3x5) to secure the camera door to the display-assembly base.
Next steps
1. Install the system-board
2. Install the back cover.
3. Install the cable cover (optional).
4. Install the stand.
5. Follow the procedure in

Bottom cover

Removing the bottom cover

Prerequisites
1. Follow the procedure in
2. Remove the stand.
3. Remove the cable cover
4. Remove the back cover.
5. Remove the system-board
About this task
The following image indicates the location of the bottom cover and provides a visual representation of the removal procedure.
Steps
1. Remove the four screws (M3x5) that secure the bottom cover to the display-assembly base.
shield.
After working inside your computer.
Before working inside your
(optional).
shield.
computer.
Removing and installing components 43