Auto Provisioning - Gigaset N720 Manual

Usually the same number as the Authentication name.
Click Set button.
You'll have to wait sometime prior for the device to reboot. If everything is done as above
described, you should have successfully registered your phone to PBXware. Dial *123 to verify
registration.

Auto Provisioning

This chapter describes how to set UAD settings, create PBXware extension and register the
phone using DHCP or Static IP address.
The following topics are covered:
UAD Settings
Creating Extension
Registering Phone
UAD Settings
UAD settings
Login to PBXware web administration interface.
Open a new browser window and enter the IP address in order to access the PBXware web
administration login screen. Example: http://192.168.1.10.
Login to PBXware with your e-mail address and password.
UAD settings.
Navigate to Settings:UAD.
Make sure Gigaset UAD is enabled. To check the UAD status click on the edit icon
corresponding to your Gigaset phone.
Make sure Status is set to Active, Auto provisioning is set to Yes, and DHCP is set to Yes.
Click on the Save button to save changes.
Creating Extension