Table of Contents
Advertisement
Realtime Memory Timing
Configure the realtime memory timings.
[Enabled] The system will allow performing realtime memory timing changes after
MRC_DONE.
Command Tristate
Configure the Command Tristate Support.
Exit On Failure
Configure the Exit On Failure for MRC training steps.
Reset On Training Fail
Reset system if the MRC training fails.
MRC Fast Boot
Enable Memory Fast Boot to skip DRAM memory training for booting faster.
Voltage Configuration
CPU Core/Cache Voltage
Input voltage for the processor by the external voltage refulator.
CPU Load-Line Calibration
CPU Load-Line Calibration helps prevent CPU voltage droop when the system is
under heavy loading.
GT Voltage
Configure the voltage for the integrated GPU.
GT Load-Line Calibration
GT Load-Line Calibration helps prevent integrated GPU voltage droop when the
system is under heavy load.
DRAM Voltage
Use this to configure DRAM Voltage. The default value is [Auto].
DRAM Activating Power Supply
Configure the voltage for the DRAM Activating Power Supply.
PCH +1.05 Voltage
Configure the chipset voltage (1.05V).
60
Advertisement
Table of Contents
