Husqvarna 325iLK Operator's Manual page 3

Hide thumbs Also See for 325iLK:
Table of Contents

Advertisement

15. Keypad
16. Power trigger
17. Battery charger cord
18. Battery charger
19. Power and Warning LED
20. Battery release buttons
21. Battery
22. LED indicator for the state of charge
23. Warning LED
24. Battery indicator button
25. Coupling for attachment
Symbols on the product
WARNING! This product can be
dangerous! Careless or incorrect use can
result in serious or fatal injury to the
operator or others. It is extremely
important that you read and understand
the contents of the operator's manual.
Please read the operator's manual
carefully and make sure you understand
the instructions before the product is
used.
Use a protective helmet in locations where
objects can fall on you. Use approved
hearing protection. Use approved eye
protection.
Maximum speed of the output shaft.
/min
Rated voltage, V
Direct current.
The product can cause objects to eject,
which can cause injury.
The product agrees with the applicable
EC directives.
Use approved protective gloves.
Use heavy-duty slip-resistant boots.
785 - 004 - 24.03.2021
Only use non-metallic, flexible cutting
attachments, i.e. trimmer heads with
trimmer cord.
Symbols on the product or its packaging
indicate that this product cannot be
handled as domestic waste. This product
must be deposited at an appropriate
recycling facility.
The operator must ensure that no people
or animals come closer than 15 metres.
When several operators are working at
the same site a safety distance of at least
15 metres must be in effect. The
attachment can forcibly throw objects that
can bounce back. This can result in
serious eye injuries if the recommended
safety equipment is not used.
Do not use in rain.
Keep all parts of your body away from the
hot surfaces.
Noise emission to the environment
according to the European Community's
Directive. The attachment's emission is
specified in the Technical data chapter
and on the label.
yyyywwxxxx
The rating plate shows the serial
number. yyyy is the production year,
ww is the production week and xxxx
is the sequential number.
Note:
Other symbols/decals on the product refer to
certification requirements for other commercial areas.
Manufacturer
Husqvarna AB
Drottninggatan 2, SE-561 82 Huskvarna, Sweden, tel:
+46-36-146500
Product liability
As referred to in the product liability laws, we are not
liable for damages that our product causes if:
the product is incorrectly repaired.
the product is repaired with parts that are not from
the manufacturer or not approved by the
manufacturer.
3

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tab850

Table of Contents