Cisco Nexus 93180YC-FX Hardware Installation page 12

Overview
• 1200-W HVAC/HVDC power supply with dual-direction airflow (white coloring)
• 930-W DC power supply with port-side exhaust airflow (blue coloring) (NXA-PDC-930W-PE)
• 930-W DC power supply with port-side intake airflow (burgundy coloring) (NXA-PDC-930W-PI)
The following figure shows the hardware features seen from the port side of the chassis.
1 Chassis LEDs (Beacon [BCN], Status [STS], and Environment
[ENV])
2 48 10/25-Gigabit SFP28 ports to APICs
3 6 40/100-Gigabit QSFP28 optical ports for uplink connections
to spine switches
To determine which transceivers, adapters, and cables this switch supports, see the
Compatibility Information
The following figure shows the hardware features seen from the power supply side of the chassis.
Cisco Nexus 93180YC-FX ACI-Mode Switch Hardware Installation Guide
2
(N9K-PUV-1200W)
Note
Both power supplies must be the same type of power source. Do not mix AC and
DC power sources.
Note
All fan modules and power supplies must use the same airflow direction during
operations. If you are using the 1200-W HVAC/HVDC power supply, the power
supply automatically uses the same airflow direction as used by the other modules
in the switch.
document.
Overview
4 Screw holes (6) for attaching
rack mounting brackets.
5 Screw holes (2) for attaching
grounding lug.
Cisco Transceiver Modules