Dell Inspiron 7500 2n1 Black Service Manual page 51

Steps
1. Remove the screw (M2x3) that secures the wireless-card bracket to the wireless card and palm-rest and keyboard assembly.
2. Remove the wireless-card bracket from the wireless card.
3. Disconnect the antenna cables from the wireless card.
4. Peel the tape that secures the antenna cables to the system board and lift the antenna cables off the system board and palm-rest and
keyboard assembly.
5. Remove the two screws (M2x3.5) that secures the right display hinge to the system board and palm-rest and keyboard assembly.
6. Remove the screw (M2.5x5) that secures the right display hinge to the system board and palm-rest and keyboard assembly.
7. Open the hinge at an angle of 90 degrees.
8. Peel the tape that secures the pen-garage cable to the system board.
9. Disconnect the pen-garage cable from the system board.
10. Disconnect the fan cable from the system board.
11. Peel the tape that secures the touchscreen cable to the palm-rest and keyboard assembly.
12. Open the latch, and disconnect the touchscreen cable from the system board.
13. Using the pull tab, disconnect the I/O cable from the system board.
14. Disconnect the speaker cable from the system board.
15. Open the latch, and disconnect the touchpad cable from the system board.
16. Open the latch, and disconnect the keyboard cable from the system board.
Removing and installing components 51