Steps
1. Align the screw holes on the processor fan and heat-sink assembly with the screw holes on the system board.
2. As per the callout on the system board, tighten the captive screws that secure the processor fan and heat-sink assembly to the
system board.
3. Connect the processor-fan cable from the system board.
Next steps
1. Install the
right-side
cover.
2. Follow the procedure in
Processor
Removing the processor
Prerequisites
1. Follow the procedure in
2. Remove the
right-side
cover.
3. Remove the
processor fan and heat-sink
About this task
The following images indicate the location of the processor and provide a visual representation of the removal procedure.
After working inside your
computer.
Before working inside your
assembly.
computer.
Disassembly and reassembly
45