Setting Up The Monitor; Installation - Philips E Series User Manual

2. Setting up the monitor

2. Setting up the
monitor

2.1 Installation

Package contents
*288E2A *288E2E
AC/DC Adapter
* DP * HDMI
* Different according to region.
Note
Use only the AC/DC adapter model:
Philips ADPC2065.
E line
288E2
Quick
Start
Register your product and get support at
www.philips.com/welcome
Monitor
User's Manual
使用产品前请阅读使用说明
Contents:
User's Manual
保留备用 Drivers
www.philips.com/welcome
This product has been manufactured by and is
sold under the responsibility of Top Victory
Investments Ltd., and Top Victory Investments
Ltd. is the warrantor in relation to this product.
Philips and the Philips Shield Emblem are
registered trademarks of Koninklijke Philips N.V.
and are used under license.
* CD
* Audio cable
(288E2A)
5
Install base stand
1. In order to well protect this monitor
and avoid scratching or damaging of
the monitor, keep the monitor face
down in the cushion for the base
installation.
2. Hold the stand with both hands.
(1) Gently attach the base to the
stand.
(2) Use your fingers to tighten the
screw located at the bottom of
the base.
(3) Use a screwdriver to tighten the
screw located at the bottom of
the base, and secure the base to
the stand tightly.
(4) Gently attach the stand to the
VESA mount area until the latch
locks the stand.
3. After attaching the base, erect
the monitor with both hands on
holding the monitor together with
styrofoam firmly. Now you can pull
out the styrofoam. When you pull
out the styrofoam, do not squeeze
the panel to avoid broken panel.