European Union (Eu) - Siemens SIMATIC NET RUGGEDCOM RSG907R Installation Manual

The device also meets the requirements of the following European directive and
standards:
•
•
•
6.1.3

European Union (EU)

This device is declared by Siemens AG to comply with essential requirements and
other relevant provisions of the following EU directives:
•
•
•
•
•
The device is marked with a CE marking and can be used throughout the European
community.
A copy of the CE Declaration of Conformity is available from Siemens AG. For contact
information, refer to
RUGGEDCOM RSG907R
Installation Manual, 02/2020, C79000-G8976-1387-09
2014/34/EU
Directive 2014/34/EU of the European Parliament and of the Council of 26 Feb-
ruary 2014 on the harmonisation of the laws of the Member States relating to
equipment and protective systems intended for use in potentially explosive at-
mospheres (recast) Text with EEA relevance
EN 60079-0:2012/A11:2013
Explosive Atmospheres – Part 0: Equipment – General Requirements
EN 60079-15:2010
Explosive Atmospheres – Part 15: Equipment Protection by Type of Protection "n"
EN 60950-1
Information Technology Equipment – Safety – Part 1: General Requirements
EN 61000-6-2
Electromagnetic Compatibility (EMC) – Part 6-2: Generic Standards – Immunity
for Industrial Environments
EN 60825-1
Safety of Laser Products – Equipment Classification and Requirements
EN 50581
Technical Documentation for the Assessment of Electrical and Electronic Prod-
ucts with Respect to the Restriction of Hazardous Substances
CISPR 32/EN 55032
Electromagnetic compatibility of multimedia equipment – Emission requirements
"Contacting Siemens (Page
6.1.3 European Union (EU)
vii)".
Certification
37