Service And Maintenance; Dismounting Steps; Disposal - Siemens SITRANS L Series Operating Instructions Manual

Service and maintenance

12.1

Dismounting steps

Before dismounting, be aware of dangerous process conditions such as e.g. pressure
in the vessel or pipeline, high temperatures, corrosive or toxic media etc.
Take note of chapters "Installing/mounting" and "Connecting to voltage supply" and
carry out the listed steps in reverse order.
12.2

Disposal

The device is made of recyclable materials. For this reason, it should be disposed of
by a specialist recycling company. Observe the applicable national regulations.
Devices described in this manual should be recycled. They may not be disposed of in
the municipal waste disposal services according to the Directive 2012/19/EC on waste
electronic and electrical equipment (WEEE).
Devices can be returned to the supplier within the EC, or to a locally approved dis-
posal service for eco-friendly recycling. Observe the specific regulations valid in your
country.
Further information about devices containing batteries can be found at:
port.industry.siemens.com/cs/document/109479891/)
Note
Special disposal required
The device includes components that require special disposal.
•
SITRANS LR120
Operating Instructions, 01/2020, A5E49829026
WARNING
Dispose of the device properly and environmentally through a local waste dispos-
al contractor.
12
(https://sup-
45