Fostex MR-16HD/CD Supplementary Manual page 16

MR16 Supplementary manual
4) Use the [MENU/ENTER] knob to select
"Source CD TNO=**" and press the
[MENU/ENTER] knob.
You can now select the desired track number of
the CD-DA disc.
5) Use the [MENU/ENTER] knob to select the
desired track number and press the
[MENU/ENTER] knob.
The display now highlights "Source CD TNO=**".
6) Use the [MENU/ENTER] knob to select
"Dest. Track=**" and press the [MENU/ENTER]
knob.
You can now select the desired destination track
pair of the currently loaded song.
You can select a track pair from among "1/2",
"3/4", "5/6", "7/8", "9/10", "11/12", "13/14" and
"15/16".
7) Use the [MENU/ENTER] knob to select the
desired destination track pair and press the
[MENU/ENTER] knob.
The display now highlights "Dest. Track=*/*".
8) Use the [MENU/ENTER] knob to select
"[EXECUTE]" and press the [MENU/ENTER] knob.
The unit starts importing track data from the
CD-DA disc. When completed, "Completed!" is
shown on the display.
<Note>:
CD track data is imported from the
beginning of each MR16 tracks (ABS 0).
(for the MR16 with a CD-R/RW drive built in)
Flasjing
9)
10)
Flasjing
16
Press the [MENU/ENTER] knob.
The display returns to the CD-RW menu screen,
where "CD-DA Import " is highlighted.
Press the [STOP] key to exit the MENU mode.
You can also exit the MENU mode by selecting
" Back" and pressing the [MENU/ENTER] knob
repeatedly.
<Note>:
If you do not satisfy with the result,
press the [UNDO/REDO] key to undo the im-
port operation. The unit returns to the condi-
tion before importing a track.
Note that, however, once you eject the disc,
load another song or turn off the power, you
cannot undo the import operation.