Print Head Alignment; Print Head Alignment - Epson L-400 User Manual

You can adjust the displacement of the printer head. If the printed picture
image has problems, try "Print Head Alignment."
Continued from page 79.
Use the ▲▼ buttons and select
"Print Head Alignment."
Press the MENU button or the MACRO button to
return to step ② .
Press the FLASH button.
The message "An alignment sheet will be printed.Make sure that A4 or Letter size plain
paper is loaded in the sheet feeder." will appear on the monitor. Place the paper in the
printer and then press the FLASH button to print the Print Head Alignment Check
pattern. To check the printed Print Head Alignment Check pattern, or to fix any gaps,
refer to the instructions provided with your printer.
After printing, the Print Head
Alignment screen is displayed.
Use the ▲▼ buttons and select the
number lined up closest with the
printed pattern. Press the
to return to step ⑥ .
Press the FLASH button to return to step ② to
confirm the new result of Print Head Alignment.
Also, press the MACRO button to return to
step ② without changing to a new Print Head
Alignment.
If the printer you are using does not support the Gap adjustment feature, the message "This
function cannot be performed from the camera with the printer you are using." will appear on
the monitor. In this case refer to the printer manual.
Print Head Alignment is only available on the Stylus Photo 830U.
PRINT HEAD ALIGNMENT
button
81