Direct Printing Process; Printing The Image Seen On The Lcd Monitor - Epson L-400 User Manual

DIRECT PRINTING PROCESS
Please make sure to use the correct cable to connect the camera to the printer.
Turn the printer on and put the printer on standby.
This illustration depicts the connections when using the Stylus Photo 830U. For other printers refer to the printer manuals.
PRINTING THE IMAGE SEEN ON THE LCD MONITOR
Only the images visible on the LCD monitor will be printed.
Pressing the
changes the display to DIRECT
PRINTING mode and highlights
"Displayed image.".
Press the
confirm selection. Use the ▲▼ buttons
to select the number of prints.
To change the print setting, press the FLASH
button or the MENU button. (See page 75-82.)
Press the MACRO button to return to ① .
Press the
printing.
Press the MACRO button to cancel printing.
Turn the DIAL SWITCH to PLAYBACK MODE and
then turn the POWER ON.
PRINT button
PRINT button again to
PRINT button to begin
Refer to the printer manual.
The printing process
quickly drains the battery.
Using the AC adaptor
is recommended when
printing.
69