Removing Laundry Or Loading Laundry When Necessary; End Of The Drying Process; Removing The Laundry; Switch-Off The Dryer - AEG LAVATHERM 57700 Operating Instructions Manual

Drying

Removing laundry or loading laundry when necessary

You can interrupt the drying process at any time to remove some of the
laundry or to add more laundry.
3
You can see by looking at the display field PROG. TIME, how long the
drying program will probably still take. This display becomes
increasingly accurate, the longer the drying process has already been
running.
0 Open the door.
1
Caution! The laundry and the drum may be
hot.
0 Remove or add more laundry.
0 Close the door.
0 Press the START/PAUSE button to resume the
drying process.

End of the drying process

The cooling phase starts shortly before the end of the drying process:
The heater is switched-off during this phase.
After the cooling phase you can remove the laundry from the dryer.
The crease guard phase follows automatically after the drying process.
The drum rotates intermittently. This keeps your laundry loose and
crease-free.
If you have pressed the AUDIBLE SIGNAL button, an acoustic signal is
sounded intermittently during this phase.

Removing the laundry

0 Open the door and remove the laundry.

Switch-off the dryer

0 Turn the program selector to the OFF position.
20