Final Operations; Error Message - CAME BXV Series Installation Manual

FINAL OPERATIONS

Once the electrical connections are done and the set up is finished, fasten the cables to the gearmotor jumper
using a cable tie.
Fit the cover and fasten it to the sides using the screws.

ERROR MESSAGE

 The error messages appear on the display.
E 1 The travel calibration was interrupted when the STOP button was activated
E 2 Gate-leaf travel calibration incomplete
E 3 Encoder broken
E 4 Services test error
E 7 Insufficient operating time
E 9 Closing obstruction
E 10 Opening obstruction
E 11 Maximum number of detected obstructions
E 13 The NC contacts are open (for example, the limit-switches)
E 14 Serial communication error
E 17 Wireless system error
E 18 The wireless system configuration is missing