TP-Link Deco M3W User Manual page 31

Chapter 2
Solid On
Note:
If you want to customize the extended network name, refer to
If you cannot find the network names with _EXT in your Wi-Fi network list, this means
that the extender has been connected to a OneMesh router and automatically copied
its wireless settings. For more information, refer to
5. Relocate your extender for optimal Wi-Fi coverage and performance.
1 ) Plug in the extender about halfway between your router and the Wi-Fi dead zone.
The location you choose must be within the range of your router.
2 ) Wait for about 2 minutes until the Signal LED
relocate the extender closer to the router to achieve better signal quality.
Tips:
To minimize signal interference, please choose a location which is far away from Bluetooth devices and other
household electronic devices, such as cordless phones, microwave ovens and baby monitors.
6. Enjoy! Connect to the extended network and enjoy the internet.
Extended Network Names:
Router's network name with _EXT at the end
Passwords:
Same as your router
Configure Wireless
Router
Halfway
Set Up Internet Connection
Network.
OneMesh with Seamless
turns solid white. If it doesn't,
Suitable location
Too far from router
No connection
Devices
Roaming.
12