Function
* The On-Screen Display (OSD) in this manual is an example to help you understand how to operate the product, and may be slightly
different on your projector.
* Most of the examples shown are with RGB (PC) input.
Channel Functions
Auto Tuning
1. Press the MENU button, then go to Channel with the ∧, ∨, <,
> buttons and press OK .
2. Press the ∧, ∨ buttons to go to Auto Tuning and press OK .
3. Press the ∧, ∨ buttons to go to Yes and press OK .
ꔈ You can save up to 1000 channels when setting to either Auto Tuning or Manual Tuning.
The maximum number depends on the broadcasting signal environment.
ꔈ Auto Tuning only adds channels being broadcast.
ꔈ Press the BACK button to exit the menu screen.
Changing Channels
Change channels by using Channel ∧, ∨ buttons or 0 - 9 buttons.
Manual Tuning
* While watching TV, you can add or delete a channel.
1. Press the MENU button, then go to Channel with the ∧, ∨, <, >
buttons and press OK
2. Press the ∧, ∨ buttons to go to Manual Tuning and press OK
3. Press the ∧, ∨, <, > buttons to select the type and number of a
desired channel.
4. Press the ∧, ∨ buttons to go to Delete (or Add) and press OK
ꔈ Press the BACK button to exit the menu screen.
.
CHANNEL
Auto Tuning
Manual Tuning
Channel Edit
CHANNEL
Auto Tuning
Manual Tuning
.
Channel Edit
.
Function
Check your antenna connection.
The previous channel informa-
tion will be updated during
Auto Tuning.
Yes
No
◀
▶
DTV
ꔂ Move ꔉ OK
Select channel type and
RF-channel number.
2
Channel
DTV Cable 9-1
Bad
Normal
Good
Delete
Close
23