Installing The Battery - BenQ EW Series User Manual

No. Name
8 Volume down
key
9 Input source
key
10 Menu key
11 Audio
Scenario key
12 Volume up key
OSD = On Screen Display.

Installing the battery

1. Turn over the remote control. Remove
the battery cover as illustrated.
2. Press down the upper part of the battery
so you can remove the battery from the
lower part as illustrated.
3. Remove the battery insulation sheet.
Key
Decreases the volume.
Accesses a list of available input sources. Press repeatedly to
cycle through these options.
• Activates OSD main menu.
• (When the hotkey menu has been activated) Closes the hotkey
menu.
Accesses a list of audio scenario options. Press repeatedly to
cycle through these options.
Increases the volume.
Description
2
1
2
Getting to know your remote control (EW3280U only)
1
15