Table of Contents
Advertisement
Embroidery
> Move the slide using the touchscreen pen/finger to increase or reduce the upper thread tension.
> Touch the yellow-framed icon on the right side to reset the alteration to default setting.
> Touch the yellow-framed icon on the left side to reset the alteration to default setting in the Setup
Program.
16.4 Embroidering via the foot control
Embroidering via the foot control is recommended when only a short sequence has to be embroidered.
While embroidering, the foot control must be pressed down all the time.
> Press the foot control to start embroidering.
168
Advertisement
Table of Contents
