5. Tighten the four M2x2.7 screws to secure the hard disk drive to the computer [2].
6. Connect the hard disk drive cable to the system board [3].
Next steps
1. Replace the battery.
2. Replace the
base
cover.
3. Replace the
microSD
4. Follow the procedure in
Solid state drive
Removing the M.2 SSD
Prerequisites
1. Follow the procedure in
2. Remove the
microSD
3. Remove the
base
cover.
4. Remove the battery.
Steps
1. Peel the costume tape from the SSD module [1].
2. Remove the single (M2x3) screw that secures the M.2 SSD to the palmrest [2].
3. Lift the M.2 SSD away from the computer [3].
44
Disassembly and reassembly
card.
after working inside your
before working inside your
card.
computer.
computer.