Electrical Devices and Equipment 4.1.2 A Safe Work Environment 4.1.3 Personnel Qualifications Safety Instructions for the Personnel 4.2.1 Personal Safety Equipment 4.2.2 Safe Handling of WAGNER Spray Devices 4.2.3 Grounding the Unit 4.2.4 Product hose 4.2.5 Cleaning and Flushing 4.2.6 Touching Hot Surfaces 4.2.7...
Page 4
IceBreaker 150-300 cm VERSION 02/2018 ORDER NUMBER DOC 2340282 5.5.7 Volume Flow 5.5.8 Performance diagrams Operating elements 5.6.1 Pressure Regulator Unit Product Filter and Return Line 5.7.1 High-pressure Filter (Option) PC Air Filter Set (Option) PC Heater Set (Option) 5.10 Feed Pump (Option) ASSEMBLY AND COMMISSIONING Training of Assembly/Commissioning Personnel...
Page 5
IceBreaker 150-300 cm VERSION 02/2018 ORDER NUMBER DOC 2340282 FUNCTION TEST AFTER REPAIR WORK DISPOSAL ACCESSORIES 13.1 Accessories for Product Outlet 13.2 Accessories for Product Inlet 13.2.1 Suction hose 13.2.2 20 Liter Tank 13.3 Accessories for Trolley and Wall Mount SPARE PARTS 14.1 How can spare parts be ordered?
2340281 Translation of the original operating manual Language Order no. Language Order no. English 2340282 Russian 2351798 French 2340285 Turkish 2386997 Italian 2340284 Japanese 2359824 Spanish 2340286 Dutch 2367470 Finnish 2391504 Swedish 2391503 Additional languages on request or at: www.wagner-group.com...
Language Order no. Language Order no. German 2335993 English 2335994 Additional languages on request or at: www.wagner-group.com CONTINUOUS-FLOW HEATER OPERATING MANUAL The operating manual Continuous-flow heater is available in the following languages: Language Order no. Language Order no. German 65860...
WAGNER explicitly prohibits any other use! The device may only be operated under the following conditions: Use the device only to work with the products recommended by WAGNER. Do not deactivate safety fixtures. Use only WAGNER original spare parts and accessories.
IceBreaker 150-300 cm VERSION 02/2018 ORDER NUMBER DOC 2340282 PROCESSIBLE WORKING MATERIALS Fluid materials like paints and lacquers. Application Water-dilutable products Solvent-based products Primers Epoxy and polyurethane lacquers, phenolic lacquers Underside protection, fire protection materials recommended limited suitability not suitable NOTICE Abrasive working materials and pigments! Greater wear of product-wetted parts.
5.5.3 5.5.5 (Technical data regarding the Jaguar, Tiger and PROTEC pumps). Safe Handling of WAGNER Spray Devices Mechanical sparks can form if the device comes into contact with metal. In an explosive atmosphere: knocking or pushing metal against metal is to be avoided;...
Empty and fill the device slowly and in a controlled manner. Avoid potentially explosive atmosphere in the surroundings. TYPE PLATES Designation 1 Manufacturer and CE Identification Wagner International AG CH-9450 ALTSTÄTTEN 2 Pump type II 2 G Ex h IIB T3/T4 Gb X MADE IN SWITZERLAND...
IceBreaker 150-300 cm VERSION 02/2018 ORDER NUMBER DOC 2340282 BASIC SAFETY INSTRUCTIONS SAFETY INSTRUCTIONS FOR THE OPERATOR Keep this operating manual at hand near the device at all times. Always follow local regulations concerning occupational safety and accident prevention. 4.1.1 ELECTRICAL DEVICES AND EQUIPMENT Electric shock hazard! Danger to life from electric shock Prepare device in accordance with the local safety requirements with regard to the...
IceBreaker 150-300 cm VERSION 02/2018 ORDER NUMBER DOC 2340282 Ensure that the pipe joints, hoses, equipment parts and connections are permanently, technically leak-proof: - Periodic preventative maintenance and service (replacing hoses, checking tight- ness strength of the connections etc.). - Regular monitoring of leaks and defects via visual inspection and odor testing, e.g., daily before commissioning, at the end of work or weekly.
"Troubleshooting" chapter. If necessary or at least every 12 months, the liquid ejection devices must be checked for safe working conditions by an expert (e.g. WAGNER Service Technician) in accordance with the guidelines for liquid ejection devices (ZH 1/406 and DGUV 100-500 Chapters 2.29 and 2.36).
IceBreaker 150-300 cm VERSION 02/2018 ORDER NUMBER DOC 2340282 4.2.4 PRODUCT HOSE Hazard due to bursting of product hose! The product hose is under pressure and may cause dangerous injuries. Ensure that the hose material is chemically resistant to the sprayed products and the flushing agents used.
IceBreaker 150-300 cm VERSION 02/2018 ORDER NUMBER DOC 2340282 4.2.5 CLEANING AND FLUSHING Hazard due to cleaning and flushing! Explosion hazard and damage to the device. Preference should be given to non-ignitable cleaning and flushing agents. When carrying out cleaning work with flammable cleaning agents, make sure that all equipment and resources (e.g., collection tank, funnel, transport cart) are conductive or static dissipative and grounded.
4.2.7 MAINTENANCE AND REPAIR Hazard due to improper maintenance and repair! Danger to life and equipment damage. Only a WAGNER service center or a suitably trained person may carry out repairs and replace parts. Use only WAGNER original spare parts and accessories.
IceBreaker 150-300 cm VERSION 02/2018 ORDER NUMBER DOC 2340282 DESCRIPTION COMPONENTS Designation Control housing with integrated silencer Air pressure regulator Ball valve Air motor Compressed air inlet Mounting flange Separating agent cup Product outlet Fluid section 10 Product inlet 11 Grounding connection B_04263 MODE OF OPERATION The piston pump is driven with compressed air (2).
IceBreaker 150-300 cm VERSION 02/2018 ORDER NUMBER DOC 2340282 PROTECTIVE AND MONITORING EQUIPMENT WARNING Overpressure! Danger to life from bursting device components. Never change the safety valve setting. The air motor is fitted with a safety valve. The safety valve has been set and sealed at the factory.
Carbide O-rings PTFE Packings Standard = Ultra high molecular weight polyethylene = PTFE with graphite 5.5.2 RECOMMENDED PACKINGS WAGNER packings are manufactured in four different materials: Product Color Leather dark brown PTFE with graphite black Ultra high molecular weight transparent...
IceBreaker 150-300 cm VERSION 02/2018 ORDER NUMBER DOC 2340282 5.5.3 TECHNICAL DATA FOR JAGUAR AND PROTEC Pump ratio 75:1 55:1 60:1 Volume flow per double stroke cm3; cc Maximum operating overpressure 7687 6382 6962 Maximum possible strokes in operation /min. Maximum recommended strokes per minute in /min.
IceBreaker 150-300 cm VERSION 02/2018 ORDER NUMBER DOC 2340282 5.5.4 DIMENSIONS AND CONNECTIONS FOR JAGUAR AND PROTEC mm; inch mm; inch mm; inch 1145; 45.0 1157; 45.5 1169; 46.0 304; 12 ~ 582; 22.9 470; 18.5 483; 19.0 675; 26.6 687;...
IceBreaker 150-300 cm VERSION 02/2018 ORDER NUMBER DOC 2340282 5.5.5 TECHNICAL DATA FOR TIGER Pump ratio 72:1 Volume flow per double stroke ( cm3; cc Maximum operating overpressure MPa; bar; psi 53; 530; 7687 Maximum possible strokes in operation /min. Maximum recommended strokes per minute in /min.
IceBreaker 150-300 cm VERSION 02/2018 ORDER NUMBER DOC 2340282 5.5.7 VOLUME FLOW Wagner AL nozzles Volume flow* in l/min Maximum ranges for continuous operation 7 MPa 10 MPa 15 MPa 20 MPa at 40 DH/min (Jaguar, inch mm Spray angle...
ORDER NUMBER DOC 2340282 5.5.8 PERFORMANCE DIAGRAMS Stroke frequency /min Example diagram 8 bar 6 bar 4 bar B_00301 Water flow rate l/min <gpm> JAGUAR 75-150 JAGUAR 55-200 Stroke frequency /min Stroke frequency /min bar (MPa) nl/min bar (MPa) nl/min <psi>...
So that complete pressure relief of the pump can be performed (see Chapter 7.4), a high- pressure filter with a return line or a relief combination, is mandatory. 5.7.1 HIGH-PRESSURE FILTER (OPTION) To ensure problem-free operation it is recommended that a WAGNER Preferred high-pressure filter be used. These have been developed especially Filter installation position for WAGNER pneumatic pumps.
IceBreaker 150-300 cm VERSION 02/2018 ORDER NUMBER DOC 2340282 PC AIR FILTER SET (OPTION) The air filter serves to filter the inlet's compressed air. Assembly of the PC air filter set on the heavy-duty PC trolley (1): 1. Mount the air filter (2). 2.
IceBreaker 150-300 cm VERSION 02/2018 ORDER NUMBER DOC 2340282 PC HEATER SET (OPTION) The electric, continuous-flow heater with explosion protection is downstream of the pump. The coating product can only be heated to maximum 80 °C. The continuous-flow heater is fitted with a temperature limiter.
IceBreaker 150-300 cm VERSION 02/2018 ORDER NUMBER DOC 2340282 5.10 FEED PUMP (OPTION) A feed pump can be used with high-viscosity products or longer feed lines. Dimensioning of the feed pump The IceBreaker piston pumps pump the working product to the product output with up and down strokes but only draw in new product on the up stroke.
IceBreaker 150-300 cm VERSION 02/2018 ORDER NUMBER DOC 2340282 ASSEMBLY AND COMMISSIONING TRAINING OF ASSEMBLY/COMMISSIONING PERSONNEL The assembly and commissioning personnel must have the technical skills to safely commission the device. When assembling, commissioning and carrying out all work, read and follow the operating manuals and safety regulations for the additionally required system components.
IceBreaker 150-300 cm VERSION 02/2018 ORDER NUMBER DOC 2340282 ASSEMBLY AND INSTALLATION WARNING Inclined ground! Risk of accidents if the device rolls away/falls. Position the trolley with the double diaphragm pump horizontally. If the floor is inclined, position the feet of the trolley towards the gradient. Secure the trolley.
IceBreaker 150-300 cm VERSION 02/2018 ORDER NUMBER DOC 2340282 6.5.1 VENTILATION OF THE SPRAY BOOTH Operate the device in a spray booth approved for the working materials. - or - Operate the device on an appropriate spraying wall with the ventilation (extraction) switched on.
Page 34
IceBreaker 150-300 cm VERSION 02/2018 ORDER NUMBER DOC 2340282 Grounding scheme (example) Ex zone Conveyor Work piece R max < 1 MΩ Spraying stand Product tank Floor, static dissipative B_00304 Part / workstation Cable cross section Pump 4 mm2; AWG 12 Product tank 6 mm2;...
IceBreaker 150-300 cm VERSION 02/2018 ORDER NUMBER DOC 2340282 COMMISSIONING WARNING Gas mixtures can explode if there is an incompletely filled pump! Danger to life from flying parts. Ensure that the pump and suction system are always completely filled with flushing agent or working medium.
IceBreaker 150-300 cm VERSION 02/2018 ORDER NUMBER DOC 2340282 OPERATION TRAINING THE OPERATING PERSONNEL The operating personnel must be qualified to operate the entire system. The operating staff must be familiar with the potential risks associated with improper behavior as well as the necessary protective devices and measures. Before work commences, the operating personnel must receive appropriate system training.
IceBreaker 150-300 cm VERSION 02/2018 ORDER NUMBER DOC 2340282 PRESSURE RELIEF / WORK INTERRUPTION The pressure must always be relieved when: − after the spraying tasks are finished, − before servicing or repairing the spraying system, − before carrying out cleaning tasks on the spraying system, −...
IceBreaker 150-300 cm VERSION 02/2018 ORDER NUMBER DOC 2340282 BASIC FLUSHING Regular flushing Regular flushing, cleaning and maintenance ensures the pump's high pumping and extraction capacity. The cleaning and flushing agents used must be compatible with the working material. Do not flush hardener pumps with water. Only flush them using suitable flushing agents (solvents).
IceBreaker 150-300 cm VERSION 02/2018 ORDER NUMBER DOC 2340282 CLEANING AND MAINTENANCE CLEANING 8.1.1 CLEANING PERSONNEL Cleaning work should be undertaken regularly and carefully by qualified and trained personnel. They should be informed of specific hazards during their training. The following hazards may arise during cleaning work: −...
DANGER Incorrect maintenance/repair! Danger to life and equipment damage. Only a WAGNER service center or a suitably trained person may carry out repairs and replace parts. Use only WAGNER original spare parts and accessories. Only repair and replace parts that are listed in the "Spare parts" chapter and that are assigned to the unit.
Yearly or as required In accordance with DGUV regulation 100-500 Chapter 2.29 and 2.36: – The liquid ejection devices should be checked by an expert (e.g., WAGNER service technician) for their safe working conditions as required and at least every 12 months.
Page 42
Fitting embossing Meaning xxx bar Pressure yymm Crimping date (year/month) Internal code Hose imprinting Meaning Wagner Name / Manufacturer yymm Date of manufacture (year/month) xxx bar (xx MPa) Pressure e.g., 270 bar (27 MPa) Internal code DNxx (e.g., DN10) Nominal diameter...
IceBreaker 150-300 cm VERSION 02/2018 ORDER NUMBER DOC 2340282 8.2.4 EMPTYING PUMP WARNING Gas mixtures can explode if there is an incompletely filled pump! Danger to life from flying parts. Ignition of potentially explosive surrounding atmosphere. Empty the device slowly and in a controlled manner. Avoid potentially explosive atmosphere in the surroundings.
IceBreaker 150-300 cm VERSION 02/2018 ORDER NUMBER DOC 2340282 8.2.5 FILLING THE EMPTY PUMP WARNING Gas mixtures can explode if there is an incompletely filled pump! Danger to life from flying parts. Ignition of potentially explosive surrounding atmosphere. Fill the device slowly and in a controlled manner. Avoid potentially explosive atmosphere in the surroundings.
IceBreaker 150-300 cm VERSION 02/2018 ORDER NUMBER DOC 2340282 8.2.6 CLEANING AND REPLACING THE HIGH-PRESSURE FILTER 1. Flush the pump and HP filter in accordance with Chapter 7.5, and 53 MPa; 530 bar; 7687 psi while doing so: Filter installation – At the preferred filter installation position: Flush via the position return valve (1).
The air motor is iced up There is a lot of condensation water in Install a water separator. the air supply. If none of the causes of malfunction mentioned are present, the defect can be remedied by a WAGNER Service Center.
DANGER Incorrect maintenance/repair! Danger to life and equipment damage. Only a WAGNER service center or a suitably trained person may carry out repairs and replace parts. Use only WAGNER original spare parts and accessories. Only repair and replace parts that are listed in the "Spare parts" chapter and that are assigned to the unit.
IceBreaker 150-300 cm VERSION 02/2018 ORDER NUMBER DOC 2340282 10.4 CLEANING THE PARTS AFTER DISASSEMBLY WARNING Incompatibility of cleaning agent and working medium! Risk of explosion and danger of poisoning by toxic gases. Examine the compatibility of the cleaning agents and working media on the basis of the safety data sheets.
IceBreaker 150-300 cm VERSION 02/2018 ORDER NUMBER DOC 2340282 11 FUNCTION TEST AFTER REPAIR WORK After all repairs, the device must be checked for safe condition before recommissioning. The necessary scope of inspection and testing depends on the repair carried out and must be documented by the repair personnel.
IceBreaker 150-300 cm VERSION 02/2018 ORDER NUMBER DOC 2340282 13 ACCESSORIES 13.1 ACCESSORIES FOR PRODUCT OUTLET B_04269 2339845 2339846 2351205 2339847 Piston pump PE/TG (Tiger: PE/L) 9992504 Separating agent 250 ml; 250 cc 236219 Grounding cable 3 m; 9.8 ft HP filter DN12 PN530-SSt with carbon steel ball 2339900 valve...
IceBreaker 150-300 cm VERSION 02/2018 ORDER NUMBER DOC 2340282 13.2 ACCESSORIES FOR PRODUCT INLET 13.2.1 SUCTION HOSE DN38 B_05289 For trouble-free suction, use hoses which are as short as possible. The maximum hose length is dependent upon the viscosity of the product, the suction height, and the nominal diameter of the hose.
IceBreaker 150-300 cm VERSION 02/2018 ORDER NUMBER DOC 2340282 13.2.2 20 LITER TANK B_05294 Order no. Order no. Order no. Order no. Designation 2339845 2339846 2351205 2339847 Piston pump PE/TG (Tiger: PE/L) 2341278 20 liter tank 2348279 Coarse sieve Suction tube PC, complete. For details, see Chapter 2348257 14.7 = Wearing part...
DANGER Incorrect maintenance/repair! Danger to life and equipment damage. Only a WAGNER service center or a suitably trained person may carry out repairs and replace parts. Use only WAGNER original spare parts and accessories. Only repair and replace parts that are listed in the "Spare parts" chapter and that are assigned to the unit.
IceBreaker 150-300 cm VERSION 02/2018 ORDER NUMBER DOC 2340282 14.2 OVERVIEW OF THE COMPONENTS Tightening torque pos. 2 and B_05280 Designation Order no. Order no. Order no. Piston pump 2339845 2339846 2351205 Fluid section 2340007 2340008 2349152 Air motor 2329625 2342487 2351208 Connection set for air motor - fluid...
Page 55
IceBreaker 150-300 cm VERSION 02/2018 ORDER NUMBER DOC 2340282 Tightening torque pos. 2 and 3 B_05281 Designation Order no. Piston pump 2339847 Fluid section 2340009 Air motor 2329627 Connection set for air motor - fluid section 2350037 Grounding cable, complete 236219 Molykote DX grease 9992616...
Page 58
IceBreaker 150-300 cm VERSION 02/2018 ORDER NUMBER DOC 2340282 Order no. Order no. Designation 9952668 Base 9952667 Clamping bracket 9900701 Socket cap screw 9921505 Spring ring 2330382 IceBreaker label 2332077 Warning label 369027 Detent body 9974124 Rod seal profile E5 9992757 Threaded elbow fitting 9992758...
IceBreaker 150-300 cm VERSION 02/2018 ORDER NUMBER DOC 2340282 14.3.2 AIR MOTOR REGULATOR FOR JAGUAR AND PROTEC B_06994 Jaguar 75-150 / 55-200 PROTEC 60-240 Order no. Order no. Designation 2328609 Pressure regulator unit, complete 2309974 Pressure regulator valve 9" 2346229...
Page 66
IceBreaker 150-300 cm VERSION 02/2018 ORDER NUMBER DOC 2340282 Tiger 12 Order no. Designation 369313 Compressed air filter 9 369312 Outlet seal DE 50 370313 Stop plate 12 370314 Sealing plug 12 370315 Control housing 12 370330 Securing ring 9943121 Spool and sleeve assembly 9974160 O-ring...
IceBreaker 150-300 cm VERSION 02/2018 ORDER NUMBER DOC 2340282 14.3.5 TIGER AIR MOTOR REGULATOR B_03955 Order no. Designation 2328610 Pressure regulator unit 12", complete 2309974 Pressure regulator valve 12" 2310588 Distribution piece LR-D Maxi 12 9998725 Pressure gauge 0-10 bar (d50) 9900360 Hexagon socket cylinder head screw 9907087...
75-150 55-200 60-240 72-300 50 Nm; 37 lbft 70 Nm; 52 lbft Assembly with air motor and fluid section: see Chapter 14.2 B_05263 Jaguar 75-150 Jaguar 55-200 PROTEC 60-240 Tiger 72-300 Order no. Order no. Order no. Order no. Designation 2350033 2350036 2351190 2350037...
IceBreaker 150-300 cm VERSION 02/2018 ORDER NUMBER DOC 2340282 14.4 FLUID SECTIONS 14.4.1 FLUID SECTION 150 CM +10 Nm 70 Nm + 7 lbft 52 lbft 100 Nm 74 lbft Regarding position 4: Tighten by hand on block. If necessary, hit the cam with a rubber mallet and use a spanner to hold position 3.
Page 71
IceBreaker 150-300 cm VERSION 02/2018 ORDER NUMBER DOC 2340282 - only 2K Order no. Order no. Order no. Designation 368506 Valve screw 2352729 Ball guide, inlet 368551 Connecting flange 368509 Valve seat, inlet 368510 Valve seat, outlet 368561 Snap ring flange 368512 Snap ring half 368513...
Page 72
IceBreaker 150-300 cm VERSION 02/2018 ORDER NUMBER DOC 2340282 14.4.2 FLUID SECTION 200 CM – 240 CM Regarding position 4: Tighten by hand on block. If necessary, hit the cam with a rubber mallet and use a spanner to hold position 3. + 7 lbft 100 Nm +10 Nm...
Page 73
IceBreaker 150-300 cm VERSION 02/2018 ORDER NUMBER DOC 2340282 200 cm 240 cm PE / TG PE/L PE/T PE / TG PE/L PE/T Order no. Order no. Order no. Order no. Order no. Order no. Designation 2336695 Valve seat, outlet 2336689 Snap ring flange 2336785...
Page 74
IceBreaker 150-300 cm VERSION 02/2018 ORDER NUMBER DOC 2340282 14.4.3 FLUID SECTION 300 CM 140 Nm; 103 lbft 300 Nm; 221 lbft 250-260 Nm; 184-191 lbft B_05284...
Page 75
IceBreaker 150-300 cm VERSION 02/2018 ORDER NUMBER DOC 2340282 Regarding position 33: Tighten by hand on block. If necessary, hit the cam with a rubber mallet and use a spanner to hold position 11. - 2K Order no. Order no. Designation 2340009 Fluid section 300 cm3...
IceBreaker 150-300 cm VERSION 02/2018 ORDER NUMBER DOC 2340282 14.5 HIGH-PRESSURE FILTER 530 bar; 7687 psi 90 Nm; 66 lbft Tighten pos. 3 by hand Identification of the filter 140 Nm 103 lbft Ball valve version in carbon steel B_04278...
Page 77
IceBreaker 150-300 cm VERSION 02/2018 ORDER NUMBER DOC 2340282 Order no. Designation 2339900 HP filter DN12-PN530, complete 2324542 Filter housing 2324543 Union nut 2330781 Fitting DF-MM-G1/2-3/8NPSM-530 bar-SSt 9955863 O-ring 2324670 Distribution housing for ball valve 9894245 Filter support Filter cartridge * 291564 * Filter sieve, 20 mesh per inch (rough) 3514069...
IceBreaker 150-300 cm VERSION 02/2018 ORDER NUMBER DOC 2340282 14.6 DN38 SUCTION HOSE For trouble-free suction, use hoses which are as short as possible. The maximum hose * (8) length is dependent upon the viscosity of the product, the suction height, and the nominal diameter of the hose.
IceBreaker 150-300 cm VERSION 02/2018 ORDER NUMBER DOC 2340282 14.8 PC HEAVY DUTY TROLLEY Assembly for Jaguar and PROTEC Mount bracket holder (3) above the crossbar (4). B_05285 Assembly for Tiger Mount bracket holder (3) below the crossbar (4). B_05286 B_05277 Order no.
IceBreaker 150-300 cm VERSION 02/2018 ORDER NUMBER DOC 2340282 14.8.1 PC AIR FILTER SET B_06996 If necessary, turn the adaptor plate by 180° so that the air filter can be mounted on the trolley. Observe the air filter's flow direction. Order no.
IceBreaker 150-300 cm VERSION 02/2018 ORDER NUMBER DOC 2340282 14.8.2 PC HEATER SET B_04281 80 Nm; 59 lbft Order no. Designation 2339728 PC heater set (For installation, see Chapter 13.3.) Heater (for details and spare parts, see the operating manual, 65021 continuous-flow heater, order no.
T4: with dry running protection. EU Declaration of Conformity The EU Declaration of Conformity is enclosed with this product. If needed, further copies can be ordered through your WAGNER dealer by specifying the product name and serial number. Order number:...
Page 84
Order no. 2340282 Edition 02/2018 ts-liquid@wagner-group.com www.wagner-group.com...