Service Smtp - Fortinet FortiGate FortiGate-800 Administration Manual

Antivirus

service smtp

FortiGate-800 Administration Guide
Use this command to configure how the FortiGate unit handles antivirus scanning of
large files in SMTP traffic and what ports the FortiGate unit scans for SMTP.
Note: This command has more keywords than are listed in this Guide. See the FortiGate CLI
Reference Guide for a complete list of commands and keywords.
Command syntax pattern
config antivirus service smtp
set <keyword> <variable>
end
config antivirus service smtp
unset <keyword>
end
get antivirus service [smtp]
show antivirus service [smtp]
Table 31: antivirus service smtp command keywords and variables
Keywords and variables
port <port_integer>
Example
This example shows how to add antivirus scanning on port and 465 and enable file
splice for SMTP traffic. Adding more ports for scanning does not erase the default,
port 25. Use the unset command to remove all ports from the list.
config antivirus service smtp
set port 465
end
This example shows how to display the antivirus SMTP traffic settings.
get antivirus service smtp
This example shows how to display the configuration for antivirus SMTP traffic.
show antivirus service smtp
01-28006-0008-20041105
Description
Configure antivirus scanning on a
nonstandard port number or
multiple port numbers for SMTP.
You can use ports from the range
1-65535. You can add up to 20
ports.
CLI configuration
Default Availability
25 All models.
321