Use Your Tv; Switching On Your Tv And Putting It In Standby Mode; Adjusting Volume; Switching Channels - Philips 5604 Series User Manual

3 Use your TV

Switching on your TV and putting it in
standby mode
TV
Remote
Turns the TV on and off of standby.
(POWER) on the TV or the remote, then TV will go to
● Press
suspend standby.
(POWER) on the TV or the remote, then TV will
● Press and hold
go to standby mode completely.
Note(s)
●
Energy consumption contributes to air and water pollution. When the AC
power cord is plugged in, your TV consumes energy with a very low standby
power consumption.

Adjusting volume

TV
Remote
To decrease or increase volume
Press VOL + / – on the TV or the remote.
●
VOL + : Volume up
VOL – : Volume down
To mute or unmute sound
Press 2 (MUTE) on the remote to mute the sound.
●
Press 2 (MUTE) again or VOL + / – to recover the original sound.
●

Switching channels

To change channels, you can do any of the following:
Press CH + / –* on the remote.
●
Use the NUMBER buttons* on the remote.
●
Press H I on the remote for digital channels only.
●
17 .
English
Continued on next page.