Playing Back Cpl; Calling Up Screen Adjustment Data - Sony SRX-R815P Operating Instructions Manual

When KDM has not been ingested, "No Key" will be
displayed.
To confirm the KDM time limit
After selecting the [KDM] radio button in the "Library"
screen, select a KDM in the [Local Folder] pane, select a
KDM to check, and then tap [Details] to check the period
of validity.
Deleting unnecessary KDM files
Tap [KDM Cleanup] to delete KDM that are not related to
DCP.

Playing Back CPL

Calling up Screen Adjustment Data

Depending on the content's signal classification (viewing
angle (HD/scope/flat)) for playback, screen adjustment
data can be called up when registered in the function
memory. Settings such as zoom ratio, and brightness are
recorded in the adjustment data.
For details on the function memory or adjustment data,
refer to the "Installation Manual."
When switching functions (i.e., adjustment data), the main
and sub projectors must both be selected and switched
individually to functions of identical numbers and names.
If function switching is included in an SPL, the functions
on both projectors can be switched simultaneously.
For details, see "Creating an SPL" (page 28)
1
In the [Status] tab's "Auditorium" screen, tap
[Projector].
The "Projector Control" screen appears.
2
Select the adjustment data appropriate to the content
from the [Function] list, and then tap [Load].
The adjustment data will be loaded into the projector.
25