Erasing Messages - Sony ICD-BP100 Primary Operating Instructions Manual

Erasing Messages

You can erase the recorded messages one by one or all messages in a folder
at a time.
Note that once a recording has been erased, you cannot retrieve it.
Erasing messages one by one
When a message is erased, the remaining messages will advance and
renumbered so that there will be no space between messages.
Before erasing
After erasing
To cancel erasing
Press xSTOP before step 2.
20
GB
Message 1
Message 2 Message 3
Erase Message 3
Message 1 Message 2 Message 3 Message 4
1 Press ERASE while playing back
the message you want to erase
or press ERASE for more than 1
second during stop mode.
A beep will sound and the message
number and "ERASE" will flash
while the first and last 5 seconds of
the message are played back 10
times.
2 Press ERASE while the message is
being played back.
The message is erased and the
remaining messages will be
renumbered. (For example, if you
erase Message 3, Message 4 will be
renumbered as Message 3. When
erasing is completed, the unit will
stop at the beginning of the
following message.)
Remaining messages are renumbered.
Message 4 Message 5