Erasing Messages; Erasing Messages One By One; Erasing All Messages In A Folder - Sony ICD-B10 Service Manual

Erasing Messages

You can erase the recorded messages one by one or all messages in a folder
at a time.
Note that once a recording has been erased, you cannot retrieve it.

Erasing messages one by one

When a message is erased, the remaining messages will advance and
renumbered so that there will be no space between messages.
Message 1
Message 2 Message 3
Before erasing
Erase Message 3
After erasing
Message 1 Message 2 Message 3 Message 4
Remaining messages are renumbered.
1 Press ERASE while playing back
the message you want to erase
or press ERASE for more than 1
second during stop mode.
A beep will sound and the message
number and " ERASE" will flash
while the first and last 5 seconds of
the message are played back 10
times.
2 Press ERASE while the message is
being played back.
The message is erased and the
remaining messages will be
renumbered. (For example, if you
erase Message 3, Message 4 will be
renumbered as Message 3. When
erasing is completed, the unit will
stop at the beginning of the
following message.)
To cancel erasing
Press xSTOP before step 2.
Message 4 Message 5
Continued
19 GB
Erasing Messages (continued)
To erase other messages
Repeat steps 1 and 2.
To erase a message partially
First divide the message by adding an index (see page 23) and then follow
the steps on page 19 to erase the message.

Erasing all messages in a folder

e.g.
Folder A
Blank space
Message 1 Message 2 Message 3
Blank space
1 Press FOLDER to
select the folder you
want to erase.
To cancel erasing
Press xSTOP before step 3.
20 GB
ICD-B10/B15
Folder B
Message 1 Message 2 Message 3
Message 1 Message 2 Message 3
2 While pressing xSTOP,
press ERASE for more
than 1 second.
" ALL ERASE" will flash
for 10 seconds.
3 While the display is
flashing, press ERASE.
7