Embedded Device Information - NEC Express5800 Series Maintenance Manual

Hide thumbs Also See for Express5800 Series:
Table of Contents

Advertisement

Chapter 2 Useful Features
1.2.4

Embedded Device Information

(1)
(Embedded RAID) Menu
When you select System Configuration > (Embedded RAID) from the System Utilities , the (Embedded
RAID) menu appears.
For details about the options, see the table below.
Option
Controller Information
Enable/Disable Smart array
Debug Messages
Configure Controller Settings
Array Configuration
Disk Utilities
Exit and launch Smart
Storage Administrator(SSA)
(2)
(Embedded LOM) Menu
When you select System Configuration > (Embedded LOM) from the System Utilities, the (Embedded LOM)
menu appears.
For details about the options, see the table below.
Option
Firmware Image Menu
Blink LEDs
Chip Type
PCIe Device ID
PCIe Address
Link Status
MAC Address
Virtual MAC Address
Parameter
-
(Check Box)
-
-
-
-
Parameter
-
[0]-X
(Display only)
(Display only)
(Display only)
(Display only)
(Display only)
(Display only)
Express5800/R120h-1E, R120h-2E Maintenance Guide
Description
Provides the information of the controller like
PCIe Bus :Device:Function, Firmware Revision,
UEFI Driver Version, Controller Temperature etc.
Select or deselect the check box to enable or
disable the Smart array debug message.
Configures the supported controller settings,
advanced controller settings(if applicable) and
clear the controller's current configuration.
Creates new array(s) from the list of drives
available and manages the existing arrays.
Displays the list of drives that are connected to
the controller and allows the user to perform
certain operations on the disks available.
Launch the Smart Storage Administrator (SSA) to
configure RAID levels.
Description
Firmware image information.
Blink LEDs for a duration up to 15 seconds.(def:0)
Shows the type and revision number of the chip.
Shows the PCIe device ID.
Shows the "PCIe_bus_number:device_
number:function_number" of this device.
Shows the link status.
Shows the fixed MAC address.
Shows the virtual MAC address.
[
]: Default setting
1. System Utilities
127

Advertisement

Table of Contents
loading

This manual is also suitable for:

Express5800/r120h-1eExpress5800/r120h-2eExp336Exp337

Table of Contents