Password
You can enter or change password.
1. Select [Password] on the [Lock] menu and then
press D .
2. Press OK / SET on the unit or b OK on the
remote control.
3. Input a password and press OK / SET on the unit
or b OK on the remote control.
To change the password, press OK / SET on the
unit or b OK on the remote control when the
[Change] option is highlighted. Input a password
and press OK / SET on the unit or b OK on the
remote control. Enter it again and press OK / SET
on the unit or b OK on the remote control to
verify.
4. Press HOME on the unit or n on the remote
control to exit the menu.
,
Note
If you forget your password, you can clear it
using the following steps:
1. Select the [Setup] menu on the [Home
Menu].
2. Input the 6-digit number "210499" and
press OK / SET on the unit or b OK on the
remote control The password is cleared.
Area Code
Enter the code of the area whose standards were
used to rate the DVD video disc, based on the list on
page 42.
1. Select [Area Code] on the [Lock] menu then
press D .
2. Input a password and press OK / SET on the unit
or b OK on the remote control.
3. Select the first character using WS buttons.
4. Press OK / SET on the unit or b OK on the
remote control and select the second character
using WS buttons.
5. Press OK / SET on the unit or b OK on the
remote control to confirm your Area code
selection.
System Setting
21
3