M.2 Pcie Solid State Drive -Ssd; Removing The M.2 Pcie Solid State Drive -Ssd - Dell Precision 3431 Service Manual

4. Install the:
a) Heat sink and heat sink fan
b) Hard drive and optical drive module
c) Front bezel
d) Side cover
5. Follow the procedure in

M.2 PCIe Solid State Drive -SSD

Removing the M.2 PCIe Solid State Drive -SSD

1. Follow the procedure in
2. Remove the:
a) Side cover
b) Front bezel
c) Hard drive and optical drive module
3. To remove the M.2 PCIe SSD card:
a) Remove the single (M2 x 3.5) screw that secures the M.2 PCIe SSD card to the system board [1].
b) Lift and pull out the SSD card from its connector on the system board [2].
c) Peel the thermal pad from the system board [3].
After working inside your computer.
Before working inside your computer.
Removing and Installing components 51