Next Steps; Set The Date And Time - Fortinet FortiGate FortiGate-1000 Install Manual

Configuring the FortiGate unit

Next steps

Set the date and time

1
2
3
4
5
6
FortiGate-200, FortiGate-300, FortiGate-400, FortiGate-500 and FortiGate-1000 FortiOS 3.0 MR4 Install Guide
01-30004-0267-20070215
Figure 13: FortiGate-1000 Transparent mode connections
You can use the following information to configure FortiGate system time and to
configure antivirus and attack definition updates.
Refer to the FortiGate Administration Guide
configuring, monitoring, and maintaining your FortiGate unit.
For effective scheduling and logging, the FortiGate system date and time must be
accurate. You can either manually set the system date and time or configure the
FortiGate unit to automatically keep its time correct by synchronizing with a
Network Time Protocol (NTP) server.
To set the date and time
Go to System > Status.
Under System Information > System Time, select Change.
Select Refresh to display the current FortiGate system date and time.
Select your Time Zone from the list.
Optionally, select Automatically adjust clock for daylight saving changes check
box.
Select Set Time and set the FortiGate system date and time.
for complete information on
Next steps
47