LG SK9Y Owner's Manual page 32

32 Operating
4. When this unit is successfully connected with
your Bluetooth device,
"PAIRED" [ your device' s name [ "BT" appears
on the display window.
,
Note
y If it is unavailable to display device name
on the unit, "-" will be displayed.
y To check the connected device' s name,
press J on the remote control. The
connected Bluetooth device' s name is
displayed.
5. Listen to music.
To play music in your Bluetooth device, refer to
3
your Bluetooth device' s user guide.
According to your Bluetooth device' s volume level,
the volume level of Bluetooth will be adjusted.
,
Note
y When using Bluetooth technology, you have
to make a connection between the unit and
the Bluetooth device as close as possible and
keep the distance.
However it may not work well in the case
below :
- There is an obstacle between the unit and
the Bluetooth device.
- There is a device using same frequency
with Bluetooth technology such as a
medical equipment, a microwave or a
wireless LAN device.
,
Note
y This unit supports Bluetooth auto pairing.
However it does not operate in the case
below:
- When you restart this unit.
- When you disconnect this unit by yourself.
- When you disconnect this unit on the
connected Bluetooth device.
y The sound may be interrupted when the
connection is interfered with by the some
other electronic wave.
y You cannot control the Bluetooth device with
this unit.
y Pairing is limited to "One" Bluetooth device.
Multi-Pairing is not supported.
y Depending on the type of the device, you may
not be able to use the Bluetooth function.
y You can enjoy using Bluetooth when using
Phone, MP3, Notebook, etc..
y The more distance between the unit and the
Bluetooth device, the lower the sound quality
becomes.
y The Bluetooth connection will be
disconnected when the unit is turned off or
the Bluetooth device gets too far from the
unit.
y If the Bluetooth connection is disconnected,
connect the Bluetooth device again.
y When a Bluetooth device is not connected,
"BT READY" appears on the display window.
y If you set the WI-FI function in the state
of unconnected network, Bluetooth
and Wireless TV Sound Sync may not be
connected.
y If you change to another function after
connecting Bluetooth device, Bluetooth
connection will be disconnected. And you
return to Bluetooth function, Bluetooth
connection will be connected automatically.