Panasonic Lumix DC-G9L Owner's Manual page 87

[Save/Restore Camera Setting]
Save the camera's setup information to the card. Since saved setup information can be
imported to the camera, you can apply the same setup to more than one camera.
• Save/load setup information using the card inserted to the card slot 1.
> [Setup] > [Save/Restore Camera Setting]
MENU
Saves the camera's setup information to the card.
• To save new information, select [New File]; to overwrite an existing file,
select that file.
• When [New File] has been selected, the name of the file to be saved is
displayed on the screen.
[Save]
[Change the
[Load] Loads the setup information on the card to the camera.
[Delete] Deletes the setup information on the card.
• Setup information can be loaded only to cameras of the same model as this camera.
• You can save up to 10 sets of setup information to one card.
[No.Reset]
Reset the file number of the next recording to 0001.
Settings: [Slot 1]/[Slot 2]
• When recording is performed after resetting this item, the folder number is updated and the
file number starts from 0001.
• A folder number between 100 and 999 can be assigned.
The folder number should be reset before it reaches 999. We recommend formatting the card
after saving the data on a PC or elsewhere.
• To reset the folder number to 100:
1 Format the card.
2 Perform [No.Reset] to reset the file number.
3 Select [Yes] on the folder number reset screen.
[Reset]
The following settings are reset to the default:
– Recording settings
– Setup settings ([Wi-Fi Setup] and [Bluetooth] settings)
– Custom settings ([Face Recog.] and [Profile Setup] settings)
– Setup/custom settings (except for [Wi-Fi Setup], [Bluetooth], [Face Recog.] and [Profile
Setup])
Saves the file with an automatically created name
[OK]
displayed on the screen.
Allows you to rename the file before saving it.
file name]
Menu
87
(ENG) DVQX1310