Panasonic Lumix DC-G9L Owner's Manual page 55

Selecting the desired focus area and saving a picture
1
Select an image with the [
2
Touch the desired focus area.
• If a picture that is in focus is not available for the selected
area, a red frame will be displayed. You cannot save a
picture in this case.
• You cannot select the edges of the screen.
• Touching [ ] will enlarge the display. You can fine-adjust
the focus by dragging the slide bar during enlarged display.
(You can also perform the same operation by pressing 2/
1.)
3
Touch [ ] to save the picture.
• The picture will be saved in JPEG format.
Merging multiple pictures to widen the focus range (Focus Stacking)
1
Touch [ ] in step
2
Touch the merging method.
[Auto Merging]
[Range Merging] Merges pictures with specified focus areas into a single picture.
3
(When [Range Merging] is selected)
Touch the desired focus area.
• Specify at least two areas.
• In-focus areas between the two areas will also be
selected, and the combined in-focus area will be indicated.
• Gray areas indicate areas that may, if selected, cause the
merged picture to look unnatural and areas that cannot be
selected.
• To cancel the selection, touch the focus area again.
4
Touch [ ] to merge the pictures and save the
resulting picture.
• The picture will be saved in JPEG format.
• The camera may automatically correct the misalignments of
pictures caused by camera shake. If they are corrected, the
angle of view becomes slightly narrower when pictures are merged.
] icon on the playback screen, and press 3.
2
of "Selecting the desired focus area and saving a picture".
Automatically selects pictures that are suited to be merged, and
merges them into a single picture.
• Priority will be given to pictures with closer focus.
Recording
Fn1
Fn1
Fn1
55
(ENG) DVQX1310