Table of Contents
Advertisement
Transport & Placement
The GO-500 STUDIO is heavy – approximately 16.07 Kg – Do not attempt to lift or move it on your
own.
A minimum of two people are required to lift or move this product.
Always use a trolley to safely transport the GO-500 STUDIO over distances of 2 Metres or more.
The unit should be always moved and placed in a horizontal position; do not place or try to move
the unit in any other way as damage or injury could result.
Place the GO-500 STUDIO on a strong, stable, flat surface that is capable of supporting the
weight. Do not use a folding or single leg table to support the GO-500 STUDIO.
Opening the Case
1. Rest the HC-800 on a flat horizontal surface with the carry handle facing the user
2. Open the buckles on two sides of the carry handle.
3. Lift open the cover
4. Remove the GO-500 system from the case.
Setting up the TLM-102 – Dual 10.1" LCD Monitor
1. Bring the LCD panel into an upright viewing position.
2. After that, please refer to following chapter "How to Connect Internal Cables" to connect
all the cables according to the instructions.
3. After all of the cables are connected properly, just remember to turn on the power switch
and then it's time for you to enjoy the efficiency and the convenience of the GO-500 Studio.
Installation
7
Advertisement
Table of Contents
